Key details
- Part No.: 1522ASSY
- Series: 27 Mm Midrange
Overview
Endstops are designed to absorb shock loads and should be installed when end controls are not used.
Specifications
| Specification | Value |
|---|---|
| Length (in) | 2 3/16 in |
| Length (mm) | 55 mm |
| Use with track/rail | R27 |
| Width (in) | 1 9/16 in |
| Width (mm) | 39 mm |
FAQs
Use a 17/64″ (6.5 mm) drill bit for making the holes in the track for installation.
Use one to two drops of McLube OneDrop or a light machine oil; do not use spray lubricants.
Use 1/4-20 x 1 3/4″ (6 mm x 45 mm) flathead stainless steel machine screws for 1618 track.
Bolt track down and place traveler car on before securing endstops.
Clean tracks with detergent and water. Clean cars by flushing with fresh water and a little detergent; avoid spray lubricants.
Drill two holes through the track, 5/16″ (8 mm) and 13/16″ (30 mm) from the end.
For 1618/1610 tracks, slip two 1/4″ (6 mm) hex nuts into the channel under the track surface, then use specified screws.
Slide track bolts, slides, and traveler car on track before securing endstops.
The 1522 Midrange Endstop fits tracks 1602, 1610, 1616, 1617, and 1618.
Exposure to some teak cleaners and caustic solutions can cause part discoloration, not covered under warranty.
Contact the SailRACE team — as certified marine experts we’re happy to help with product selection, installation and after-sales servicing, before and after your purchase.
![C. Sherman Johnson Cotter, RingClevis Pin Parts Kit [37-503]](https://www.marinerailparts.com/wp-content/uploads/2026/10/c-sherman-johnson-cotter-ringclevis-pin-parts-kit-37-503.webp)
