Envío especial: consultar presupuesto / Special shipping: request a quote. Solo para las referencias HKN-R32.6M: consulta el coste de envío antes de realizar el pedido, indicando destino y cantidad. / For these references, please ask for a shipping quote before ordering, stating destination and quantity. Contactar / Contact us.
Overview
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. All Big Boat track is predrilled with holes for mounting fasteners and one pinstop hole between each fastener.
Specifications
| Specification | Value |
|---|---|
| Endstop | 548/E3200 |
| Fasteners (in) | 3/8 Fh in |
| Fasteners (mm) | 10 FH mm |
| Length (ft in) | 19′ 8 1/4″ Ft in |
| Length (m) | 6 m |
| Mounting hole spacing (in) | 3 15/16 in |
| Mounting hole spacing (mm) | 100 mm |
| Splice link | 3153 |
| Trim cap | 3157 |
| Weight (kg) | 5.87 kg |
| Weight (oz) | 207 oz |
FAQs
Blue Loctite® adhesive is required; it is included in certain mounting kits and should be used on mounting screws or slugs as directed.
Mast prebend may require straightening before installation of the track and mounting slugs.
Depending on configuration, you may need to purchase mounting slugs, specific screws, or endstop kits separately; reference the parts list for details.
Yes, cut the special length top track and drill holes as specified. For short top tracks, use existing or new holes for mounting.
Ensure track must not block halyard exit; bottom of track should be as low as possible but allow installation of long headboard cars.
Yes, blue Loctite adhesive is called for at certain installation steps, such as applying one drop into each connector slug hole.
Run a connector slug up the mast to check for burrs and file opening as needed to ensure smooth fit.
Slugs are slipped into the groove, taped in place, and then the track is installed over them with fasteners.
Strictly follow all instructions to avoid hazards that can kill or hurt you and others. Personnel should be trained and specialized.
Strictly follow all instructions to avoid potential hazards that can cause injury or death during installation.
Install top track first, then add full-length track pieces, sliding in slugs and loosely installing screws as you proceed down.
Purchase stainless steel 10 mm or 3/8″ screws separately if using drill and tap style track. For mounting slug type, HFS319 flathead screws 8 x 25 mm are used and included in the mounting kit.
Use the drill and tap type track on masts without grooves or where slugs won’t fit. Stainless steel 10 mm or 3/8″ screws must be purchased separately.
Each screw must engage at least five (5) threads; turn screw 360° five times after threads engage to ensure secure mounting.
If mounting slugs won’t fit, use the drill and tap type track and purchase stainless steel screws separately.
For R32 drill and tap type track, purchase stainless steel 10 mm or 3/8″ screws separately.
Yes, but ensure that cars clear the storm trysail track. Mast face should be flat or convex.
Tracks may stick when reaching spliced areas on the mast; loosen screws if binding occurs to slide the track into position.
Contact the SailRACE team — as certified marine experts we’re happy to help with product selection, installation and after-sales servicing, before and after your purchase.
