6
marinerailparts.com
6
Home » Shop » Fish Finders » Garmin STRIKER Vivid 5cv — With GT20 Transducer

Garmin STRIKER Vivid 5cv — With GT20 Transducer

Original price was: $260.00.Current price is: $161.85.

Sale!
SKU: 010-02551-01 Category:
Share

Observe the fish and structures with the highest level of detail after choosing the color of the screen, the location and the probe for your day in the water with the STRIKER Vivid Probe.

Probe of Great Clarity and Color

Choose from 7 new intense color options to see both fish and structures with the highest level of contrast and clarity in your 4-inch probe.

Integrated Probe

Use the included GT20 transducer to obtain the traditional CHIRP probe and the Garmin CHIRP ClearVü scanning probe.

Marking of Waypoints

To catch more fish, you need to know the best locations. Use the waypoint marking to easily find the best fishing points again.

High Sensitivity GPS

Plan and create routes, and visualize the speed of your boat on the probe using the high-sensitivity GPS.

Quickdraw Contours

No one knows the waters in which you fish better than you do. With the STRIKER Vivid 4cv probe, you can store up to 8,000 square kilometers of maps with contours of 30 centimeters.

Mounting Components Included

The STRIKER Vivid 4cv probe includes a rotating/tilting support in addition to components and a mounting cable for stern mirror and motor for trolling fishing.

Specifications:

Physical And Performance Characteristics
Dimensions of the Unit (WIDTH/HEIGHT/DEPTH) 4CV: 9,8 X 17,4 X 4,5 cm (3,9” X 6,9” X 1,8”)

5CV: 18,8 X 11,6 X 5,4 cm (7,4” X 4,5” X 2,1”)

7CV: 9,3” X 5,5” X 2,3” (23,5 X 14,0 X 5,8 cm)

9CV:11,1” X 6,5” X 2,4” (28,2 X 16,5 X 6,0 cm)
Weight 4CV: 0,3 kg (0,7 lb)

5CV: 0,5 kg (1,0 lb)

7CV: 0,8 kg (1,7 lb)

9CV: 1,1 kg (2,4 lb)
Water Resistance Classification IPX7
Type of Screen 4CV: QSVGA

5CV, 7CV, 9CV: WVGA in color
Screen Size (WIDTH/HIGH) 4CV: 2.1″ X 3.7″ (5.4 X 9.5 cm); 4.3″ Diag, (10.9 cm)

5CV: 2.6″ X 4.3″ (6.5 X 10.8 cm); 5.0″ Diag (12.8 cm)

7CV: 3.4″ X 6.1″ (8.6 X 15.4 cm); 7.0″ Diag (17.8 cm)

9CV: 4.4″ X 7.8″ (11.2 X 19.8 cm); 9.0″ Diag (22.8 cm)
Screen Resolution (WIDTH/HIGH) 4CV: 272 X 480 pixels

5CV: 800 X 480 pixels

7CV: 800 X 480 pixels

9CV: 800 X 480 pixels
Assembly Options flush, tilt/swivel
Screen Keys With keys
Maps And Memory
Waypoints 5000
Track Points 50,000
Tracks 50
Routes 100
Sensors
GPS Yes
BUILT-IN Receiver Yes
Compatible with Waas Yes
Optional Map Support
Garmin Quickdraw Contours Yes
Electric
Feeding Input 12 to 20 Vdc
Typical Current Consumption 4CV – 5CV: 0.40 A

7CV: 0.67 A

9CV: 0.75 A
Maximum Current Consumption 1.5 A
Energy Consumption 4CV: 4.8

5CV: 4.8

7CV: 8.0

9CV: 9.0
Probe Specifications And Functions
Show the Probe Yes
Traditional Probe (Dual PROBE/DUAL Frequency) Built-in
CLEARVÜ Yes
Frequency Traditional: 50/77/200 kHz CHIRP (high and medium frequency) ClearVü: 260/455/800 kHz
Transmission Power 4CV: 300 W (Rms)

5CV, 7CV, 9CV: 500 W (Rms)
Blocking in the Background (Shows the Signals You Return From the Background to the Surface) Yes
Graph and Record of Water Temperature Yes
Connections
Ports for 4-PIN Transducer 4CV: 1

CV:1

7CV: 1

9CV: 2
Garmin’s WI-FI® Network (Local Connection) 4CV: No

5CV: No

7CV: Yes

9CV: Yes
Functions Of Fishfinder
SPLIT-SCREEN Zoom Yes
Fish Symbol (Helps to Identify Fish) Yes
Automatic Gain Technology (Allows You to Obtain Detailed Images of Structures and Densities of the Background) Yes
Adjustable Depth Line (Measures the Depth of Objects Underwater) Yes
A-SCOPE (Shows in Real Time the Fish That Pass Through the Beam Transducer) Yes
Temperature Sensor Included Yes
Customized Depth Scale Yes
Additional
Additional Features 4CV:

  • A port for a 4-pin transducer
  • Contornos de dibujo rápido
  • GPS Integrated
  • Marking waypoints
  • GPS Direction (COG)
  • Current consumption at 12 V: 0.40 A

5CV:

  • A port for a 4-pin transducer
  • Quickdraw Contours
  • Integrated GPS
  • Marking waypoints
  • GPS Direction (COG)
  • Current consumption at 12 V: 0.40 A

7CV:

  • A port for a 4-pin transducer
  • A port for 4-pin SideVü transducer
  • Wireless connectivity: yes
  • Quickdraw Contours
  • Integrated GPS
  • Marking waypoints
  • GPS Direction (COG)
  • 12 V current consumption: 0.67 A

9CV:

  • A port for a 4-pin transducer
  • A port for 4-pin SideVü transducer
  • Wireless connectivity: yes
  • Quickdraw Contours
  • Integrated GPS
  • Marking waypoints
  • GPS Direction (COG)
  • Current consumption at 12 V: 0.75 A

FAQs

Can you cut the transducer cable during installation?

No. Cutting the transducer cable will void your warranty. Never cut the cable.

How do you test for leaks after transducer installation?

Check your boat for leaks around any screw holes added below the water line before leaving it in the water for an extended period.

Where should the cable-entry cover be installed if routing the cable through the transom?

Install the cable-entry cover over the pilot hole and cable, with the opening pointing downward, and seal with marine sealant.

How should the cable-entry cover be installed for a transom pass-through?

Place the cover over the hole and cable with the opening downward, mark and drill pilot holes, seal with marine sealant, and secure with screws.

How should you seal screws when installing the transducer on the transom?

Apply marine sealant to all screw threads to prevent water from seeping into the transom.

What should be used to coat the transducer for long-term water exposure?

Use a water-based anti-fouling paint to coat the transducer and mounting hardware for protection against marine growth.

What’s the guidance for mounting the transducer on twin-drive boats?

The transducer should be mounted between the drives if possible for best performance.

How should the transducer be positioned on boats with clockwise-rotating propellers?

Mount the transducer on the starboard (right) side if the propeller moves clockwise when the boat is moving.

Where should the transducer be mounted on single-drive boats?

Mount as close to the centerline as possible but at least 38 cm (15 in.) from the propeller; avoid the propeller path and turbulent water.

Can the transducer cable be routed near ignition or high-energy wires?

You should route the cable away from ignition wires, batteries, and high-energy wires to avoid noise and interference.

What is the minimum compass safe distance for the STRIKER 5 Series device?

Keep the device at least 25 cm (9.84 in.) away from a compass.

How should the transducer be attached to a trolling motor?

Attach the transducer with hose clamps, point the narrow end away from the propeller, and secure the cable with waterproof tape.

What safety warning is given regarding navigation with this device?

The device is a navigational aid and does not replace prudent operation or official charts.

How should you prepare the transducer for marine growth protection?

Lightly sand, clean with isopropyl alcohol, and coat with water-based anti-fouling paint (never acetone-based) for long-term water exposure.

Who do I contact for help with installation, servicing or advice?

Contact the SailRACE team — as certified marine experts we’re happy to help with product selection, installation and after-sales servicing, before and after your purchase.