Garmin Carbon Fiber Mast Bracket (2 Units)

Use this Garmin mast bracket to mount the compatible wind or marine instrument sensor on the mast in the specified configuration.

Reference: Soporte de mástil para 2 unidades (solo para GNX 120)

• Designed for the matching Garmin or gWind sensor family referenced in the title.
• Useful when installing or servicing mast-mounted sensor hardware on a sailboat.

FAQs

No, mounting holes or other mounting features are not pre-drilled; you must drill or prepare the arms based on your needs.

A 2 Phillips screwdriver, drill and drill bits (if needed), and mounting hardware suited to your mast are required.

Adhere the gaskets to the back of each device, not the mast bracket.

No, you must purchase mounting hardware to secure the bracket to the mast as it is not included.

Yes, all hardware needed to assemble the mounting bracket is included with the bracket.

Route all backbone cabling through holes in the rear panels, then connect rear to front panels using included screws.

No, these are included with the marine instruments, not the bracket itself.

Select a location where the bracket won’t be damaged during normal operation of the boat.

Yes, a NMEA 2000 backbone cable is included to extend your NMEA 2000 network to the bracketed instruments.

Yes, if the included backbone cable is not long enough, you must purchase a longer cable.

Contact the SailRACE team — as certified marine experts we’re happy to help with product selection, installation and after-sales servicing, before and after your purchase.