Airmar P19 — 20° Tilt – Garmin Edition

Our transducer mounted through the plastic hull offers good performance at high speeds and is an excellent selection of fiberglass and metal helmets.

This 300 W transducer with 8 pins has a depth of 900 ft (274 m), an operating frequency of 77/200 kHz, a beam of 45/15 degrees and a strut angle of between 8 and 15 degrees.

The transducer kit is supplied with the installation instructions. Follow the instructions carefully to avoid damage to the boat.

*Do not use with wooden helmets.

If used with the echo™ fishfinder device, an adapter cable is required for the transducer with reference number 010-11947-00.

Specifications:

FAQs

External thru-hull transducers usually require a fairing block to aim the beam vertically, optimizing sonar signal return.

To obtain the best possible performance, install all transducers according to the included installation instructions.

Mounted in clean water forward of propellers and running gear, this installation produces the most effective signal return because nothing on the vessel interferes with the transducer’s active face.

If you experience installation issues, contact Garmin Product Support or seek help from a professional installer.

If you experience difficulty during the installation, contact Garmin Product Support or seek the advice of a professional installer.

The P19 transducer is a thru-hull style, which means it must be installed in a hole drilled through the hull of the boat.

Flush types are installed on sailing vessels to produce minimum drag.

Mounted in clean water forward of propellers and running gear, this produces the most effective signal return.

A thru-hull pair is recommended for SideVü transducers if deadrise is greater than 5 degrees.

Contact the SailRACE team — as certified marine experts we’re happy to help with product selection, installation and after-sales servicing, before and after your purchase.