Airmar B150M — 12° Tilt – Garmin Edition

This entry level CHIRP solution provides good depth capability and target separation.

This 8-pin 300 W bronze thru-hull mount transducer has a depth of 600 ft; an operating frequency of 95-155 kHz; a beamwidth of 26/17 degrees; and a 0 to 7 degree deadrise.

Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.

Specifications:

FAQs

It is critical to install the transducer following the included installation instructions for best performance.

Yes, thru-hull installations require a hole to be drilled in the boat hull.

If installation difficulties arise, Garmin recommends contacting a professional installer for assistance.

If you have trouble during installation, contact Garmin Product Support or a professional installer for assistance.

If you have difficulty during installation, contact Garmin Product Support or a professional installer.

Yes, external thru-hull transducers are for larger untrailered vessels and usually require a fairing to aim the sound beam vertically.

Install the transducer in clean water forward of propellers and running gear to ensure the most effective signal return.

Flush thru-hull transducers are recommended for smaller boats with a minimum deadrise angle. External options typically need a fairing.

External thru-hull transducers are ideally mounted in clean water forward of propellers and running gear for best signal return.

Yes, for best performance, match the transducer with your device’s sonar technology for optimal results.

Contact the SailRACE team — as certified marine experts we’re happy to help with product selection, installation and after-sales servicing, before and after your purchase.