Key details
- Product type: 14 mm Bolt-Down Fairlead
- Options: Configuration
- Available variants: 6
Overview
Harken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize line wear.
Specifications
Specifications vary by the selected variant. Use the variant table below to compare the available configurations and part numbers.
Variant details
Select the option combination that matches the required part number.
| Configuration | Part No. |
|---|---|
| Single | 9300 |
| Double | 9301 |
| Triple | 9302 |
| 4 Hole | 9303 |
| 5 Hole | 9304 |
| 6 Hole | 9305 |
FAQs
Only the one and two hole 14 mm models can use hex head bolts, but installation requires wedging a flat bladed screwdriver between the bolt head and pocket.
Use large washers or backing plates and lock washers or locknuts under deck during installation to ensure secure mounting.
The fairlead must be installed on a flat, reinforced deck that can bear a load equal to the breaking load of the fairlead used.
Fairleads must be installed on a flat area of deck, reinforced if necessary to bear a load equal to the breaking load.
Secure the fairlead using all fastener holes for proper installation.
Regular inspections are advised to check for loosening, cracks, or damage, especially after periods of heavy load.
Secure the fairlead using all fastener holes with appropriate backing hardware to maximize strength and stability.
Easy, one person mounting is enabled when using appropriate fastener head types as listed in the manual.
For the 9300 (14 mm) only the one and two hole models can use hex head bolts, and require wedging a flat bladed screwdriver.
Use 5/16″ (8 mm) fasteners for the 9300 14 mm Bolt-Down Fairlead. Select A4 (316) or A2 (18-8) stainless steel fasteners.
Clean by frequently flushing with fresh water to maintain the fairlead.
Exposure to some teak cleaners and caustic solutions can discolor the part and is not covered under warranty.
Contact the SailRACE team — as certified marine experts we’re happy to help with product selection, installation and after-sales servicing, before and after your purchase.
