Airmar B619 — 20° Tilt (Garmin Edition)

Our transducer mounted through the bronze hull offers good performance at high speeds and is especially suitable for fiberglass and wood hulls.

It has a depth of 900 ft, an operating frequency of 77/200 kHz; a beam width of 45/15 degrees and a strut angle of 8 to 15 degrees.

The transducer kit is supplied with the installation instructions. Follow the instructions carefully to avoid damage to the boat.

*Do not use with wooden helmets. If used with the echo™ series, a transducer adapter cable is required.

Specifications:

FAQs

This model uses a thru-hull mounting, which requires a hole to be drilled through the hull of the boat for installation.

For best possible performance, install transducers according to the included installation instructions. Professional help is advised if you experience difficulty.

All transducers should be installed following the included installation instructions for best performance and to avoid damage.

Drilling a hole for a thru-hull transducer is required and the process increases installation complexity. Care must be taken to avoid hull damage.

If you experience installation difficulty, contact Garmin Product Support or a professional installer.

If installation is difficult, contact Garmin Product Support or seek a professional installer’s advice.

Yes, thru-hull transducers are installed in a hole drilled through the boat’s hull.

If installation is difficult or complex, consult Garmin Product Support or a professional installer.

There are thru-hull transducers for every hull material, ensuring compatibility regardless of your boat’s construction.

For best signal return, mount the transducer in clean water, forward of propellers and running gear.

Performance may be affected; always install according to the included instructions for best results.

A pair is recommended when mounting a SideVü transducer in a location with deadrise greater than 5 degrees.

Contact the SailRACE team — as certified marine experts we’re happy to help with product selection, installation and after-sales servicing, before and after your purchase.